dmesg - Radeon 7500 with Linux 5.4 kernel
Linux version 5.4.116-gentoo-alpha (root@xp1000) (gcc version 11.1.0 (Gentoo 11.1.0 p1)) #1 Wed May 5 19:30:29 PDT 2021
Booting on Tsunami variation Monet using machine vector Monet from SRM
Major Options: EV67 LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ
Command line: root=/dev/sda4 page_poison=1
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 262134
memcluster 2, usage 1, start 262134, end 262144
Initial ramdisk at: 0x(____ptrval____) (4234804 bytes)
4096K Bcache detected; load hit latency 21 cycles, load miss latency 127 cycles
Console graphics on hose 0
On node 0 totalpages: 262134
DMA zone: 1792 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 262134 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists, mobility grouping on. Total pages: 260342
Kernel command line: root=/dev/sda4 page_poison=1
Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes, linear)
Sorting __ex_table...
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 2060680K/2097072K available (7516K kernel code, 457K rwdata, 2160K rodata, 184K init, 279K bss, 36392K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS: 64
Turning on RTC interrupts.
Console: colour VGA+ 80x25
printk: console [tty0] enabled
Calibrating delay loop... 1326.92 BogoMIPS (lpj=647168)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 2, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 2, 32768 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.0+0x8c/0x1e0 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1866466235866741 ns
futex hash table entries: 256 (order: -1, 6144 bytes, linear)
NET: Registered protocol family 16
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x1ffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:07.0: [1080:c693] type 00 class 0x060100
pci 0000:00:07.1: [1080:c693] type 00 class 0x010180
pci 0000:00:07.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:07.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:07.1: reg 0x20: [io 0x1300-0x130f]
pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.2: [1080:c693] type 00 class 0x010100
pci 0000:00:07.2: reg 0x10: [io 0x0170-0x0177]
pci 0000:00:07.2: reg 0x14: [io 0x0374-0x0377]
pci 0000:00:07.2: reg 0x20: [mem 0x01060000-0x0106ffff]
pci 0000:00:07.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:07.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:07.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:07.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.3: [1080:c693] type 00 class 0x0c0310
pci 0000:00:07.3: reg 0x10: [mem 0x010a0000-0x010a0fff]
pci 0000:00:0b.0: [9005:00c0] type 00 class 0x010000
pci 0000:00:0b.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:00:0b.0: reg 0x14: [mem 0x010a1000-0x010a1fff 64bit]
pci 0000:00:0b.0: reg 0x30: [mem 0x01000000-0x0101ffff pref]
pci 0000:00:0b.1: [9005:00c0] type 00 class 0x010000
pci 0000:00:0b.1: reg 0x10: [io 0x1100-0x11ff]
pci 0000:00:0b.1: reg 0x14: [mem 0x010a2000-0x010a2fff 64bit]
pci 0000:00:0b.1: reg 0x30: [mem 0x01020000-0x0103ffff pref]
pci 0000:00:0c.0: [1002:5157] type 00 class 0x030000
pci 0000:00:0c.0: reg 0x10: [mem 0x40000000-0x47ffffff pref]
pci 0000:00:0c.0: reg 0x14: [io 0x1200-0x12ff]
pci 0000:00:0c.0: reg 0x18: [mem 0x01070000-0x0107ffff]
pci 0000:00:0c.0: reg 0x30: [mem 0x01040000-0x0105ffff pref]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0d.0: [14e4:16c7] type 00 class 0x020000
pci 0000:00:0d.0: reg 0x10: [mem 0x01080000-0x0108ffff 64bit]
pci 0000:00:0d.0: reg 0x30: [mem 0x01090000-0x0109ffff pref]
pci 0000:00:0d.0: PME# supported from D3hot
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
PCI host bridge to bus 0001:01
pci_bus 0001:01: root bus resource [io 0x200000000-0x201ffffff] (bus address [0x0000-0x1ffffff])
pci_bus 0001:01: root bus resource [mem 0x200000000-0x23fffffff] (bus address [0x00000000-0x3fffffff])
pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0001:01:03.0: [1011:0019] type 00 class 0x020000
pci 0001:01:03.0: reg 0x10: [io 0x200010000-0x20001007f]
pci 0001:01:03.0: reg 0x14: [mem 0x201151000-0x2011513ff]
pci 0001:01:03.0: reg 0x30: [mem 0x201100000-0x20113ffff pref]
pci 0001:01:06.0: [1077:1020] type 00 class 0x010000
pci 0001:01:06.0: reg 0x10: [io 0x200001000-0x2000010ff]
pci 0001:01:06.0: reg 0x14: [mem 0x201150000-0x201150fff]
pci 0001:01:06.0: reg 0x30: [mem 0x201140000-0x20114ffff pref]
pci 0001:01:08.0: [1011:0024] type 01 class 0x060400
pci 0001:01:08.0: Primary bus is hard wired to 0
pci_bus 0001:02: extended config space not accessible
pci 0001:02:09.0: [1033:0035] type 00 class 0x0c0310
pci 0001:02:09.0: reg 0x10: [mem 0x201000000-0x201000fff]
pci 0001:02:09.0: supports D1 D2
pci 0001:02:09.0: PME# supported from D0 D1 D2 D3hot
pci 0001:02:09.1: [1033:0035] type 00 class 0x0c0310
pci 0001:02:09.1: reg 0x10: [mem 0x201001000-0x201001fff]
pci 0001:02:09.1: supports D1 D2
pci 0001:02:09.1: PME# supported from D0 D1 D2 D3hot
pci 0001:02:09.2: [1033:00e0] type 00 class 0x0c0320
pci 0001:02:09.2: reg 0x10: [mem 0x201002000-0x2010020ff]
pci 0001:02:09.2: supports D1 D2
pci 0001:02:09.2: PME# supported from D0 D1 D2 D3hot
pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 02
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 02
pci 0000:00:0c.0: BAR 0: assigned [mem 0x10000000-0x17ffffff pref]
pci 0000:00:0b.0: BAR 6: assigned [mem 0x09000000-0x0901ffff pref]
pci 0000:00:0b.1: BAR 6: assigned [mem 0x09020000-0x0903ffff pref]
pci 0000:00:0c.0: BAR 6: assigned [mem 0x09040000-0x0905ffff pref]
pci 0000:00:07.2: BAR 4: assigned [mem 0x09060000-0x0906ffff]
pci 0000:00:0c.0: BAR 2: assigned [mem 0x09070000-0x0907ffff]
pci 0000:00:0d.0: BAR 0: assigned [mem 0x09080000-0x0908ffff 64bit]
pci 0000:00:0d.0: BAR 6: assigned [mem 0x09090000-0x0909ffff pref]
pci 0000:00:07.3: BAR 0: assigned [mem 0x090a0000-0x090a0fff]
pci 0000:00:0b.0: BAR 1: assigned [mem 0x090a1000-0x090a1fff 64bit]
pci 0000:00:0b.1: BAR 1: assigned [mem 0x090a2000-0x090a2fff 64bit]
pci 0000:00:0b.0: BAR 0: assigned [io 0x8000-0x80ff]
pci 0000:00:0b.1: BAR 0: assigned [io 0x8400-0x84ff]
pci 0000:00:0c.0: BAR 1: assigned [io 0x8800-0x88ff]
pci 0000:00:07.1: BAR 4: assigned [io 0x8c00-0x8c0f]
pci_bus 0000:00: resource 4 [io 0x0000-0x1ffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffff]
pci 0001:01:08.0: BAR 8: assigned [mem 0x209000000-0x2090fffff]
pci 0001:01:03.0: BAR 6: assigned [mem 0x209100000-0x20913ffff pref]
pci 0001:01:06.0: BAR 6: assigned [mem 0x209140000-0x20914ffff pref]
pci 0001:01:06.0: BAR 1: assigned [mem 0x209150000-0x209150fff]
pci 0001:01:03.0: BAR 1: assigned [mem 0x209151000-0x2091513ff]
pci 0001:01:06.0: BAR 0: assigned [io 0x200008000-0x2000080ff]
pci 0001:01:03.0: BAR 0: assigned [io 0x200008400-0x20000847f]
pci 0001:02:09.0: BAR 0: assigned [mem 0x209000000-0x209000fff]
pci 0001:02:09.1: BAR 0: assigned [mem 0x209001000-0x209001fff]
pci 0001:02:09.2: BAR 0: assigned [mem 0x209002000-0x2090020ff]
pci 0001:01:08.0: PCI bridge to [bus 02]
pci 0001:01:08.0: bridge window [mem 0x209000000-0x2090fffff]
pci_bus 0001:01: resource 4 [io 0x200000000-0x201ffffff]
pci_bus 0001:01: resource 5 [mem 0x200000000-0x23fffffff]
pci_bus 0001:02: resource 1 [mem 0x209000000-0x2090fffff]
SMC37c669 Super I/O Controller found @ 0x(____ptrval____)
pci 0000:00:0c.0: vgaarb: setting as boot VGA device
pci 0000:00:0c.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:0c.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 1024 (order: 1, 16384 bytes, linear)
TCP established hash table entries: 16384 (order: 4, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 4, 131072 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 2, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes, linear)
NET: Registered protocol family 1
pci 0000:00:0b.0: CLS mismatch (32 != 64), using 64 bytes
Unpacking initramfs...
random: fast init done
Freeing initrd memory: 4128K
Using epoch 1980 for rtc year 41
platform rtc-alpha: registered as rtc0
workingset: timestamp_bits=62 max_order=18 bucket_order=0
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler mq-deadline registered
io scheduler kyber registered
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[drm] radeon kernel modesetting enabled.
radeon 0000:00:0c.0: remove_conflicting_pci_framebuffers: bar 0: 0x10000000 -> 0x17ffffff
radeon 0000:00:0c.0: remove_conflicting_pci_framebuffers: bar 2: 0x9070000 -> 0x907ffff
radeon 0000:00:0c.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV200 0x1002:0x5157 0x1002:0x013B 0x00).
radeon 0000:00:0c.0: VRAM: 128M 0x0000000010000000 - 0x0000000017FFFFFF (64M used)
radeon 0000:00:0c.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 1032404 KiB
[TTM] Initializing pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x00000000FF280000).
radeon 0000:00:0c.0: WB disabled
radeon 0000:00:0c.0: fence driver on ring 0 use gpu addr 0x0000000018000000 and cpu addr 0x(____ptrval____)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x0000000018002000
[drm] ring test succeeded in 0 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
[drm] fb mappable at 0x10040000
[drm] vram apper at 0x10000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
Console: switching to colour frame buffer device 160x64
radeon 0000:00:0c.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:0c.0 on minor 0
st: Version 20160209, fixed bufsize 32768, s/g segs 256
Floppy drive(s): fd0 is 1.44M
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
registered taskstats version 1
platform rtc-alpha: setting system clock to 2021-05-06T04:37:11 UTC (1620275831)
FDC 0 is a post-1991 82077
Freeing unused kernel memory: 184K
This architecture does not have kernel memory protection.
Run /init as init process
atkbd serio0: keyboard reset failed on isa0060/serio0
atkbd serio1: keyboard reset failed on isa0060/serio1
udevd[388]: starting version 3.2.10
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[389]: starting eudev-3.2.10
libata version 3.00 loaded.
PCI: Setting latency timer of device 0000:00:07.1 to 64
scsi host0: pata_cypress
scsi host1: pata_cypress
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0x8c00 irq 14
ata2: DUMMY
tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
qla1280: QLA1040 found on PCI bus 1, dev 6
attempt to access beyond end of device
fd0: rw=0, want=16, limit=8
floppy: error 10 while reading block 0
tulip0: EEPROM default media type Autosense
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block
tulip0: Index #1 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block
tulip0: Index #2 - Media AUI (#2) described by a 21142 Serial PHY (2) block
tulip0: Index #3 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block
tulip0: Index #4 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block
tulip0: Index #5 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block
tg3.c:v3.137 (May 11, 2014)
net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0x209151000, 00:10:64:30:bf:d5, IRQ 45
tg3 0000:00:0d.0 eth1: Tigon3 [partno(268496-002) rev 1100] (PCI:33MHz:64-bit) MAC address 00:11:0a:86:cd:7c
tg3 0000:00:0d.0 eth1: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:00:0d.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:00:0d.0 eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0001:02:09.2: EHCI Host Controller
ehci-pci 0001:02:09.2: new USB bus registered, assigned bus number 1
ehci-pci 0001:02:09.2: irq 30, io mem 0x209002000
ehci-pci 0001:02:09.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ata1.00: ATAPI: TOSHIBA CD-ROM XM-6202B, 1110, max MWDMA2
ata1.00: failed to set xfermode (err_mask=0x2)
random: crng init done
random: 6 urandom warning(s) missed due to ratelimiting
scsi(2:0): Resetting SCSI BUS
scsi host3: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi 3:0:0:0: Direct-Access FUJITSU MAP3367NC 0108 PQ: 0 ANSI: 3
scsi3:A:0:0:
Tagged Queuing enabled. Depth 253
scsi target3:0:0: Beginning Domain Validation
scsi target3:0:0: wide asynchronous
scsi target3:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
scsi 3:0:0:0: Power-on or device reset occurred
scsi target3:0:0: Ending Domain Validation
sd 3:0:0:0: [sda] 71775284 512-byte logical blocks: (36.7 GB/34.2 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: b3 00 00 08
sd 3:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
scsi host2: QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.06, Driver version 3.27.1
sd 3:0:0:0: [sda] Attached SCSI disk
ata1.00: failed to set xfermode (err_mask=0x2)
ata1.00: limiting speed to MWDMA2:PIO3
scsi host4: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsi 0:0:0:0: CD-ROM TOSHIBA CD-ROM XM-6202B 1110 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
cgroup2: Unknown parameter 'memory_recursiveprot'
systemd[1]: systemd 248 running in system mode. (+PAM -AUDIT -SELINUX -APPARMOR +IMA +SMACK -SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 +LZ4 -XZ -ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture alpha.
systemd[1]: Hostname set to .
systemd[1]: /lib/systemd/system/gpm.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Condition check resulted in Kernel Debug File System being skipped.
systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
fuse: init (API version 7.31)
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Started Journal Service.
EXT4-fs (sda4): re-mounted. Opts: (null)
systemd-journald[523]: Received client request to flush runtime journal.
proc: Bad value for 'hidepid'
attempt to access beyond end of device
fd0: rw=0, want=16, limit=8
floppy: error 10 while reading block 0
tg3 0000:00:0d.0 enp0s13: renamed from eth1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:07.3: OHCI PCI host controller
ohci-pci 0000:00:07.3: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:07.3: irq 10, io mem 0x090a0000
tulip 0001:01:03.0 enP1p1s3: renamed from eth0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0001:02:09.0: OHCI PCI host controller
ohci-pci 0001:02:09.0: new USB bus registered, assigned bus number 3
ohci-pci 0001:02:09.0: irq 28, io mem 0x209000000
usb 2-1: new low-speed USB device number 2 using ohci-pci
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0001:02:09.1: OHCI PCI host controller
ohci-pci 0001:02:09.1: new USB bus registered, assigned bus number 4
ohci-pci 0001:02:09.1: irq 29, io mem 0x209001000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low-speed USB device number 2 using ohci-pci
input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1:1.0/0003:0E8F:0022.0001/input/input4
hid-generic 0003:0E8F:0022.0001: input: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:07.3-1/input0
input: GASIA USB KB V11 Consumer Control as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1:1.1/0003:0E8F:0022.0002/input/input5
input: GASIA USB KB V11 System Control as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1:1.1/0003:0E8F:0022.0002/input/input6
hid-generic 0003:0E8F:0022.0002: input: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:07.3-1/input1
input: Microsoft Basic Optical Mouse as /devices/pci0001:01/0001:01:08.0/0001:02:09.0/usb3/3-1/3-1:1.0/0003:045E:0084.0003/input/input7
hid-generic 0003:045E:0084.0003: input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0001:02:09.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mousedev: PS/2 mouse device common for all mice
Adding 2097360k swap on /dev/sda1. Priority:-2 extents:1 across:2097360k
proc: Bad value for 'hidepid'
proc: Bad value for 'hidepid'
proc: Bad value for 'hidepid'
tg3 0000:00:0d.0 enp0s13: Link is up at 1000 Mbps, full duplex
tg3 0000:00:0d.0 enp0s13: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s13: link becomes ready
proc: Bad value for 'hidepid'